Rotating Spice Rack
Print Profile(2)
Bill of Materials
Description
đ¶ïž Modern Tabletop Spice Rack / Modular Spice Rack
Bring order to your kitchen! This modern and space-saving spice rack offers space for up to 14 spice jars (7 per tier). Thanks to the spring clips and precisely fitting recesses in the base, the jars stand absolutely securely.
Thanks to two different tolerance versions, the rack fits perfectly, no matter how your printer is calibrated.
â ïž IMPORTANT PRINT NOTE: Order & Print Pauses!
This model uses a clever system where parts are inserted into each other during printing. Please read the instructions carefully or simply use my pre-made print profile!
1. The correct order:
- Print first: You must first completely print print plates 1 and 4.
- Print next: Only then do you start printing print plate 2.
2. Integration during printing (In-situ assembly):
- During the printing of print plate 2, the previously printed parts (from plates 1 and 4) must be directly attached while the printer is paused.
- Important: If you do not use my pre-made print profile, you must manually insert 4 print pauses in the slicer to attach the parts in time!
Since the exact layer number for the pause varies depending on your chosen layer height, I strongly recommend that you use my official print profile â all pauses are already perfectly set at the correct height there! You can also find a guide for the pauses in the model images.
3. Required Ball Bearings (Hardware):
- 2 thin-section bearings are required for the smooth rotating function of the rack.
Dimensions: Inner diameter 20 mm / Outer diameter 27 mm / Height 4 mm (Model: 6704 ZZ / 2RS)
đ„ Features & Highlights
- Two-tier design: Maximum space utilization on the countertop or in the cabinet.
- Secure hold: Integrated, flexible clips prevent the jars from wobbling or falling out.
- Stability: Extremely stable due to assembly during printing, with no visible screws or glue joints.
đ ïž General Print Settings
- Material: PLA, Matte PLA (looks particularly elegant) or PETG.
- Walls: At least 3â4 walls so that the clips get the necessary spring force and stability.
- Infill: 15â20%
Boost Me (for free)
đŹ If you like the model and everything worked out well, I would be very happy about a 5-star rating or a boost. That helps me and the project a lot here.
Happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)