Front panel 2 USB KIA RIO 2012
Print Profile(1)
Description
I modeled this part for a friend who owns a 2012 KIA RIO and just replaced his car radio with a newer one with GPS etc. There are two female USB cables as output and he therefore wanted to place them on the front panel in place of the original plate which originally has a USB socket and a Jack socket. This small plate detaches from the main plate. It's a bit complicated, you have to understand how it's held, but you can do it. I print these parts in ABS, mandatory in a car, with a 0.15 layer, 3 walls at 20% and no supports for the main part. For the hook that holds the two USB sockets, I print it on its side with supports. For fastening, two 3x16 bolt-head screws with washers are needed to have enough space to place the retaining clip for the female USB sockets.
This is my first model upload, having found absolutely nothing corresponding, I finally modeled this part myself and I am sharing it thinking it might be useful to one of you… I'm probably clumsy, bad presentation etc. Tell me if something is wrong.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)