Kai Leng Mass Effect
Print Profile(7)




Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.76x240mm in size
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #11 (1.14mm) swap to Dark Gray
At layer #12 (1.22mm) swap to Blue Gray
At layer #13 (1.30mm) swap to Jade White
At layer #20 (1.86mm) swap to Sunflower Yellow for the rest.
Powered by MakerWorld-Chroma Canvas (https://makerworld.com/makerlab/chromaCanvas)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.









Comment & Rating (0)