The Nameless One - Planescape Torment - Free 3D Print Model

Search models, users, collections, and posts

Side Quest Hues

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

P2S

X2D

P1P

X1 Carbon

H2D

H2S

X1E

H2D Pro

H2C

A2L

0.08mm layer, 2 walls, 100% infill

Designer

3.9 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Always loved this game as a kid, got it out of a discount bin and although it was confusing story wise for 12 year old me, it still holds a special spot in my heart.

Project: 1.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 1.8
    #00358e PLA BambuLab Basic Blue Transmission Distance: 2.1
    #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
    #b15533 PLA BambuLab Matte Terracotta Transmission Distance: 1
    #c3a738 PLA BambuLab Basic Gold Transmission Distance: 3
    #cbc6b8 PLA BambuLab Bone White Transmission Distance: 1.3
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #12 (1.04mm) swap to BambuLab Basic Blue Gray
    At layer #16 (1.36mm) swap to BambuLab Basic Blue
    At layer #17 (1.44mm) swap to BambuLab Basic Cyan
    At layer #19 (1.6mm) swap to BambuLab Matte Terracotta
    At layer #21 (1.76mm) swap to BambuLab Basic Gold
    At layer #26 (2.16mm) swap to BambuLab Bone White for the rest.