Pegboard Glasses Holder
Print Profile(2)
Description
A wider glasses holder, suitable for IKEA SKÅDIS pegboards with 1.2mm thick holes. Also available for standard 5mm thick ones.
Most glasses holders are placed on flat surfaces. The pegboard-compatible designs I found were either too narrow or too shallow, not very stable, so I made one myself~
Based on PETG, 0.4mm nozzle. Variable layer height was used for the rounded top. The hooks at the back require printing with supports (be careful when removing). To ensure sufficient stability during use, the lower clips might be quite tight during installation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)