Magnetic Insect Netting Mount

This is the magnetic insect mount.
It  requires 8x3mm magnets in varying amounts based on which of the included models you need, and how many.
Always be mindful as to the direction of magnets when inserting and glueing in place to avoid unncessesary reprints.

There are two sides to the mounts, and two types of mount.
Chose how many you need to print. For a window with a blind at the top, you may need two of each.

The first mount is the L/angled shape, which fit any window corner. It uses 8 pcs 8x3mm neodymium magnets that must be glued in place.
One side is the window frame side, this side prints with the holes up, and an 60x11mm slot for dual sided (preferably VHB) tape.
The other side is the snap-on side, which prints with a flanged edge around the model for a better visual appeal and no sharp corners to touch.
This side prints with the holes down, and features notches for grabbing when removing the snap-on from the window-side.

The second mount is the straight shape that fits when you have something mounted at the top of the window like a window blind.
This mount uses 4 pcs 8x3mm neodymium magnets and have the same features as the L/angle shape.