Girl_DataCorruption_HueForge
Print Profile(1)
Description
Boost Me (for free)
Built layer by layer to create depth, dimension, and an emotional experience beyond ordinary printing.
Designed not just to be viewed — but to be felt.
→ Link to my collection of works ←
******************************************************************************************
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 166.67x250mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2mm
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#ffffff PLA BabmyLab Basic Jade White Transmission Distance: 5.2
This print uses 5 unique filaments
Swap Instructions:
Start with BambuLab Green
At layer #8 (0.72mm) swap to Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #18 (1.52mm) swap to Jade White for the rest.
******************************************************************************************
For only One AMS, need 1 pauses during the printing,
Start with 4 colors as follows:
Slot1: Green
Slot2: Black
Slot3: Blue Gray
Slot4: Grey
1st pause was set at Layer #12 in the print file to allow color swap:
Slot1: Green --> Jade White
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)