The Ultimate Print-in-Place Hinged Box
Print Profile(0)
Description
The Ultimate Print-in-Place Hinged Box (No Supports)
Meet the Zero-Assembly Mechanical Pocket Case—a sleek, functional storage container designed to print as a single, articulated piece right off your build plate!
This model features an integrated custom hinge system designed with exact 0.4mm print-in-place tolerances. It is the perfect blend of a functional organizer and a calibration test to showcase your printer's precision.
🌟 Key Features
- Print-in-Place: No screws, no glue, and no assembly required. The hinge works instantly.
- 100% Support-Free: Both halves sit entirely flat on the build plate. Zero wasted material on supports.
- Optimized Wall Thickness: Walls are calibrated to exactly 2.0mm for clean, fast perimeters on standard 0.4mm nozzles.
- Parametric Design: Built entirely using OpenSCAD for clean geometry.
🛠️ Recommended Print Settings
For the best results and a smooth-moving hinge, use the following slicer settings:
| Setting | Recommended Value |
|---|---|
| Layer Height | 0.2mm (Standard) |
| Infill | 15% - 20% (Gyroid or Grid) |
| Perimeters / Walls | 3 to 5 |
| Supports | None (Turn off completely) |
| Brim | Not required (unless you experience bed adhesion issues) |
| Material | PLA, Silk PLA (looks amazing!), or PETG |
⚠️ Important Slicing Tip: Make sure your horizontal expansion/tolerance settings are at default. The built-in clearance is
Boost Me (for free)
Guys, Please help by boosting, i want to support the Bambu Community By making models.
0.4mm. If your printer is over-extruding, the hinge may fuse. Ensure your filament flow is well-calibrated!
If you have suggestions of what i should design comment it below
License
Comment & Rating (0)