Search models, users, collections, and posts
Fidget Rings print in place
IP Report
Print Profile(2)
0.2mm layer, 3 walls, 10% infill
37 min
1 plate
!RTFM! Fast+Quality PLA, 0.20 mm layer, 2 walls, 15% infill, The outer ring spins more-no issue
37 min
1 plate
Open in Bambu Studio
Boost
132
289
86
9
649
738
Released
Description
Fidget Rings – Print in Place
Hey maker! 👋 A fun set of interlocking rings to explore geometry and fidget at the same time.
Features:
- Rings are printed inside each other with the same curvature but different movement.
- Inner ring is tight, outer ring can be removed for play.
- Tolerance of 0.25 mm works on almost any 3D printer.
- Great for learning geometry or just having fun when bored.
Printing Tips:
- PLA or PETG recommended for smooth movement.
- Print flat and check tolerances for best results.
⚠ Images are for reference only – use your own photos if you remix.
Support me and get a commercial license and exclusive models by joining my Club on Printables: https://www.printables.com/@Preischl3D
Commercial License on Makerworld: https://makerworld.com/@Preischl3D
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (86)