Smoker White Chase - 160mm Dynamic Statue

💨 Smoker White Chase - 160mm Dynamic Statue

"Justice cannot be bought or bartered!"

Capture the absolute authority of Marine Vice Admiral Sir Smoker (The White Chase) from One Piece. Frozen in a striking, high-momentum combat stance, this premium figure showcases Smoker propelled into the air by his Logia elemental power (Moku Moku no Mi / Smoke-Smoke Fruit), with his signature giant billowing cloak and his massive Nanashaku Jitte weapon ready to strike.

Standing at 160mm tall (inclusive of the sculpted smoky diorama base), this model is structurally scaled to fit perfectly into any display alongside other high-rank collection figures.

📐 Print Specs & Engineering

• Total Height: 160mm (Including integrated smoke cloud base).
• Layer Height: 0.12mm (Highly recommended to retain smooth transitions on the vapor clouds and face definition).
• Nozzle: 0.4mm FDM standard.

🛠️ Custom Stability Pillars & Support Guide

⚠️ ADVANCED SLICER OPTIMIZATION: To combat the intense, unstable geometry of the long diagonal weapon and the coat overhang, this project file includes integrated custom manual primitive modifiers to ensure a 99% success rate without print failure ;-)

• 🗼 Weapon Stabilization (Cones): Two explicit custom conical primitive pillars are placed to anchor the long Jitte staff directly to the build plate (see the marked placement photo). This eliminates nozzle drag and stringing artifacts on the upper layers.
• 🧥 Anti-Sagging Support (Cylinder): A very thin custom cylindrical pillar has been added directly underneath the coat assembly. This shares the load with the tree supports, preventing the lower layers of the jacket from shifting or dropping under their own weight.
• 🧹 Clean Post-Processing: Both the stabilizing cones and the internal thin cylinder are engineered to pop off easily. Simply snip them at the contact points with your flush cutters; they will detach without marring the visible surface of the model.
• 🎨 Painter's Tip: The long staff removes cleanly, but a very quick, light pass with a fine hobby sandpaper under the leg section is recommended if you plan to prime and paint the statue.

📂 Browse All My One Piece collection HERE👇

📂 Browse All My collection HERE 👇

Technical & Creative Note: This design is based on an AI generation that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.

🛠️ Support the Process!

💡 What you see is what you get: Unlike many profiles that only upload digital renders of unprintable models, every single design here is fully test-printed, refined in Blender/Meshmixer, and optimized for FDM before release.

I spend hours tweaking geometries, custom supports, and wasting my own filament so that you can enjoy a flawless, hassle-free print on your first try.

If my test-printing hours saved your time and filament, feel free to keep my printers running and fuel the next project! Any support is greatly appreciated: paypal.me/mjrko84