Embergard Deck Box — Pillage and Plunder

Deck box for the Pillage and Plunder card set from Underworlds: Embergard.

Single-colour engraved design with a themed emblem and deck name deeply engraved into the lid (0.8 mm depth). The design is picked out by shadow rather than colour change — no filament swaps, no prime tower, no AMS needed. Just one spool.

Holds 32 standard-size cards (63.5 x 88 mm) in standard sleeves (~66 x 91 mm) with room for extra reference cards.

Print details:

• Optimised for Bambu Lab P2S with 0.4 mm nozzle
• - 0.20 mm layer height, single colour
• - No supports needed — lid prints engraving face-down for crisp first-layer detail, base prints open-face-up
• - 5 mm outer brim for adhesion (peels off cleanly)
• - Friction-fit lid with 0.22 mm clearance per side
• - Suggested filament: Bambu PLA Matte Charcoal

Dimensions:

• Base: 72 x 97 x 24 mm (outer)
• - Lid: 76.4 x 101.4 x 12 mm (outer)
• - Internal cavity: 68 x 93 x 22 mm

If the friction fit is off:

• Too tight? Scale the lid X/Y by +0.5% in Bambu Studio
• - Too loose? Scale by -0.3%

Part of the complete Embergard deck box set — also available: Blazing Assault, Emberstone Sentinels, Countdown to Cataclysm.