Wolfcraft Countersink Box Ø12 Ø16 Ø19
Print Profile(1)
Description
This box was specially designed for the Wolfcraft countersink set Ø12 / Ø16 / Ø19.
Each countersink has its own receptacle with a matching diameter. This ensures the tools sit securely in the box and do not immediately fall out if the open box is moved slightly.
The lid is held by magnets. Additionally, the lid slightly engages with the body of the box to ensure it is guided cleanly.
The lettering on the lid is recessed, which prevents it from wearing out quickly. If needed, the lettering can later be filled with acrylic paint or an acrylic marker.
Required Parts
8× Neodymium magnets 6×2 mm
some superglue for the magnets
Print Settings
Material: PLA / PLA+
Nozzle: 0.4 mm
Layer height: 0.20 mm
Wall lines: 3
Infill: 8–10 %
Support: No
Brim: recommended
Brim width: approx. 5 mm
Brim separation: approx. 0.18 mm
Recommended Speed
For a better fit of the lid, I recommend not choosing too high a wall speed.
Recommended:
Outer wall: approx. 120–160 mm/s
Inner wall: approx. 180–220 mm/s
The box also works with standard speed, but depending on the printer and material, the lid may have a little more play.
Printing Notes
The body is printed with the open side facing up.
The lid can be printed with the lettering facing down on the print bed. This will give the top of the lid a nice texture and keep the recessed lettering clearly visible.
The magnet pockets are designed for 6×2mm magnets with glue. Without glue, the magnets may sit loosely depending on the printer and tolerance.
Please check the polarity of the magnets before gluing them in.
Suitable for
Wolfcraft 3-piece countersink set
Ø12 / Ø16 / Ø19 mm
1/4" hex shank
Item number: 2584000
Boost Me (for free)
If this model was useful to you, I would appreciate a boost. Thank you for your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)