Tentacle Appendages for Ratjob's Servitor Skull
Print Profile(1)
Bill of Materials
Description
++Begin Transmission++
M2.026.05.25; 13:30EST
This is an accessory kit for you to create some tentacled type appendages for Ratjob's Servitor Skull. Found Here.
This set o also contains some Magnetized Feet for the Servitor Spider Type Legs. Found Here. and the Servitor Leg Accessories.
This Techpriest wanted to create some additional appendages to reflect the headcannon of the servitor skull. While spider type legs are absolutely amazing in certain scenarios, these customizable tentacle type appendages really provide you with all the options your chapter may need.
The first 3 plates in the profile are magnetized and swappable feet that work in this kit as well as the other servitor skull kits. 6mm round magnets are used.
The 4th plate is an alternative grippy foot that provides more traction.
The 5th plate is another bottom hub for the servitor, as if you build this kit, you can just swap from spider type legs to the tentacle accessories by un-screwing the bottom and replacing it with the new one. quick swap! There is also a rear-of-skull plug that can accept the tentacle appendages as well.
plate 6 is the mini ball connectors to place between each tentacle section. Plate 7, 8 and 9 are three different diameter tentacle sections (small, medium, and large), they can be mix and matched to suit your own needs and desires.
Plate 10 is a tentacle terminus piece that has the slotted attachment section so you can add existing attachments like the blades, saw, and grippy hand found in ratjob's other servitor models and here.
Plate 11 is a tentacle terminus piece that is fitted for 6mm round magnets if you are going the magnet route.
Happy Printing and don't forget to share your creations!
!BE ADVISED!
You will need some 1.7mm diameter craft wire or other type of wire to run down the lengths of the tentacles to make them articulate. The wire used here was found at an arts-and-crafts store and is typically used in clay or other sculpture modeling to provide internal structure for a sculptor placing clay over the wire frame.
…Or… of course, you can glue the pieces together if you are making a static version of the model.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (11)