Ocean 3d Maker

cover

IMG_6271.JPG

plate_1.png

0dc5504477635479.png

0.2mm layer, 6 walls, 25% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please Boost me</boostcontent></boostme><h2>Anti-Roce para la Capota</h2>¿Cansado de que la capota de tu descapotable roce contra las barras antivuelco y se termine desgastando o rompiendo? Esta es la solución definitiva.Este modelo es un protector diseñado específicamente para desviar ligeramente la lona o absorber el impacto/roce continuo cada vez que abres y cierras la capota, protegiendo tanto el tapizado de las barras como el material de tu techo.<h3>Características del diseño:</h3><ul><li>Protección activa: Evita el desgaste prematuro y las marcas antiestéticas en la capota.</li><li>Ajuste perfecto: Se acopla de forma firme a la barra sin necesidad de modificaciones permanentes.</li><li>Estética limpia: Diseñado para ser lo más discreto posible y mantener la línea original del coche.</li></ul><h3>Recomendaciones de Impresión:</h3><blockquote>⚠️ ¡IMPORTANTE! Debido a que el interior de un coche descapotable puede alcanzar temperaturas muy altas en verano, NO uses PLA.</blockquote><ul><li>Material recomendado: PETG, ASA o ABS (el ASA es el ideal por su excelente resistencia a los rayos UV y al calor).</li><li>Altura de capa: 0.2mm.</li><li>Relleno (Infill): 20% - 30% (Giroide o Rejilla para mayor resistencia).</li><li>Soportes: [Sí, en las zonas de anclaje / No requiere soportes - Dependiendo de tu diseño].</li><li>Orientación: Recomiendo imprimirlo sobre [indicar la cara más plana] para maximizar la fuerza de las capas.</li></ul>¡Si te ha servido y ha salvado tu capota, no olvides dejar un Like, un comentario y subir la foto de tu Make! Me ayuda muchísimo a seguir creando.<h2>Convertible Soft Top Roll Bar Friction Guard</h2>Tired of your convertible&#39;s soft top rubbing against the roll bars and getting worn out or torn? This is the ultimate fix.This 3D-printed guard is specifically designed to gently deflect the soft top canvas or absorb the continuous friction every time you open and close the roof, protecting both the roll bar trim and your expensive soft top material.<h3>Features:</h3><ul><li>Active Protection: Prevents premature wear, tear, and unsightly marks on your soft top.</li><li>Snug Fit: Clips/snaps firmly onto the roll bar without requiring any permanent modifications to your car.</li><li>Clean Aesthetics: Designed to look as low-profile and OEM-like as possible.</li></ul><h3>Print Recommendations:</h3><blockquote>⚠️ IMPORTANT! Since car interiors can get extremely hot during summer, DO NOT use PLA.</blockquote><ul><li>Recommended Material: PETG, ASA, or ABS (ASA is highly recommended for its excellent UV and heat resistance).</li><li>Layer Height: 0.2mm.</li><li>Infill: 20% - 30% (Gyroid or Grid for extra strength).</li><li>Supports: [Yes, for the clip areas / No supports needed - Depending on your design].</li><li>Orientation: I recommend printing it on its [indicate the flattest side] to maximize layer adhesion and strength.</li></ul>If this saved your soft top, please leave a Like, a review, and post your Make! It really helps me keep creating.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please Boost me</boostcontent></boostme><h2>Convertible Soft Top Roll Bar Friction Guard</h2>Tired of your convertible's soft top rubbing against the roll bars and getting worn out or torn? This is the ultimate fix.This 3D-printed guard is specifically designed to gently deflect the soft top canvas or absorb the continuous friction every time you open and close the roof, protecting both the roll bar trim and your expensive soft top material.<h3>Features:</h3><ul><li>Active Protection: Prevents premature wear, tear, and unsightly marks on your soft top.</li><li>Snug Fit: Clips/snaps firmly onto the roll bar without requiring any permanent modifications to your car.</li><li>Clean Aesthetics: Designed to look as low-profile and OEM-like as possible.</li></ul><h3>Print Recommendations:</h3><blockquote>⚠️ IMPORTANT! Since car interiors can get extremely hot during summer, DO NOT use PLA.</blockquote><ul><li>Recommended Material: PETG, ASA, or ABS (ASA is highly recommended for its excellent UV and heat resistance).</li><li>Layer Height: 0.2mm.</li><li>Infill: 20% - 30% (Gyroid or Grid for extra strength).</li><li>Supports: [Yes, for the clip areas / No supports needed - Depending on your design].</li><li>Orientation: I recommend printing it on its [indicate the flattest side] to maximize layer adhesion and strength.</li></ul>If this saved your soft top, please leave a Like, a review, and post your Make! It really helps me keep creating.

Print Profile(1)

Description

Convertible Soft Top Roll Bar Friction Guard

Features:

Print Recommendations:

Comment & Rating (0)

License

Related Models

Mazda Mx5 Nd / Fiat Abarth 124 Soft Top Guard