Brass Bucket
Print Profile(2)
Description
Another model release! This time a cosmetic, the Brass Bucket!
Fairly straightforward to print, use the same orientation given in the print profile.
The main large brass detail is originally printed on the given orientation. You can change it but be prepared for noticable layer stair stepping being very visable.
If you print it with given orientation, use a wide brim, the profile has a 35mm brim.
(IF you have any issues with it falling over, be sure to clean your buildplate, apply glue, or use a supertack buildplate. Be sure to have that clean too.)
This is a helmet made for my head, which is 61cm in circumference.
Provided is a sizing ring with 2 versions. One is split in two and the other is it in fullsize.
USE THE SIZING RING IF YOU ARE UNSURE ABOUT FITMENT.
Tolerances can change when sizing, be cautious of it being tighter to assemble when sizing down.
The faceplate has 2 squares behind each set of holes. This is originally a 80x80mm square meant for a mesh. (size can differ if you have to scale it for personal fit.)
As always, issues with the model itself (not bed adhesion and other issues that are user or printer error) can be reported in the comments or in DM's
Membership
Want to support me more directly?
Boost Me (for free)
Or you can boost me for free!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)