Step FIAT Ducato Cover Caps CITROEN Jumper

Problem solver against dust and sand particles on the step

Simple cover caps for the step of the FIAT Ducato Version 7 from 2019

Successor and predecessor models have the same step and should therefore also fit - see comments

Two different caps are needed per step because the hole sizes are different

The cap with the low / smaller bead goes into the hole towards the front

The cap with the slightly wider collar into the hole towards the rear

Also usable with identical models like Citroen Jumper, Peugeot Boxer, Opel Movano

The caps fit very snugly into the openings - please press firmly

First trips without issues The hot summer '26 without problems

The caps sit firmly, flush and prevent the accumulation of dirt in the depressions

Currently printed on Bambu P2S in PLA Basic

I thank all subsequent users and would like to know if and with which other models (besides FIAT 7) the caps fit

Please leave a note for other interested parties

I am just at the beginning of 3D printing fun

And, there are still some cool tools in the pipeline around camping, Pössl, panel vans and the problems you didn't have before

Many thanks for a review if the component provides value for you For me, it would be an incentive for new things

If you like it and if it is useful to you, please like and/or follow ---- thank you very much for that

Boosting and commenting is also possible :-)

All my published models are my own parts and are created with a Bambu P2S 3D printer, exclusively with Bambu ORIGINAL filament.

I do this for my own private purposes, without guarantee of function and safety, and publish these in Makerworld as inspiration for other users.

Reuse ONLY privately and not commercially at YOUR OWN risk and responsibility.

All models have worked for me - as described - with the published files.