ATP Nova 45 - AAP-01 Kit - Free 3D Print Model

Search models, users, collections, and posts

Adyz Tactical Prints

Hobby & DIY>Sport & Outdoors

IP Report

GIF

Print Profile(1)

All

P2S

H2D

P1S

X1 Carbon

H2S

H2C

P1P

X1E

H2D Pro

X2D

A2L

0.2mm layer, 3 walls, 20% infill

Designer

3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Membership

Want to sell physical prints of this model? Join my membership today!

Join

Welcome to Adyz Tactical Prints !

Print Ready & Optimized Orientation For Best Results

Compatibility: Airsoft Classic Army AAP-01
Hardware: Not necessary
Recommended Filament: PETG HF/CF
Support/Brim: No/No (sliced & ready to print)
Quick Tip: When installing the rear sight push hard on the bolts to catch the thread.
Short Info: Excited to present to you guys another AAP kit. This is a compact and tactical model that has a bit of futuristic design in it and most important you can attach flashlights and red dot sights to your gun. Install is simple, remove the front threaded cap and both sights, slide over the gun the printed kit and add back the removed parts and you're done !

Check it out on my IG : https://www.instagram.com/reel/DYvFdHMKn-q/?igsh=ZGk4b3pjOWlwbDJy

If you like this I bet you will like my Blackveil Kit's and other AAP goodies on my profile !

All projects are printed and tested on P2S using Bambu Lab filaments for best results.

Print Questions or Issues? Send me a PM, I'm here to help !

⭐⭐⭐⭐⭐ If you like it, please rate & share a photo !
🚀 Boosts help me buy filament and test print more cool stuff.
📸 https://www.instagram.com/adyztacticalprints

“Calibration is key for 0.1mm tolerances.” - ATP

Membership

Want to sell physical prints of this model? Join my membership today!

Join

Comment & Rating (16)

@jordan7831

printer in pet g. very nice design! couple suggestions if you do an updated model. 1. add support for the front sight holes as they were slightly off after the top of the hold dropped. easy to solve as I used a knife to remove some material. 2. the rail towards the back is very fragile where the rear sight screws into. consider making a version that uses the two holes in the top of the pistol. this will require the user to get two screws but is a much better attachment point. otherwise excellent design!!!

(Edited)

The designer has replied

@atp.

Hi ! 1. the printer is very capable to do that overhang without supports, all holes printed vertically will allays have a flat bottom and top side because of the limitation of the layer height 2. I know that side looks very fragile at first glance but if you manage to brake it with the rear sight mounted let me know. I went with this style of fixing because the sights align horizontally and users can use the original bolts, most people don't have various bolt types and lengths at hand. If i made the 2 holes on the upper rail which is thin they will need countersunk bolts, using them will lead to layer splitting because most users tend to over tighten. I used the 2 upper holes on my AAP01 Blackveil project that has more thickness in that zone and uses socket head bolts that have a flat bottom to avoid layer splitting. Thank you for printing my project ! Glad you like it and it turned out great with the dual tone :D Please consider leaving a rating if you have the time :)

(Edited)

@jordan7831

Replying to @atp. :

thanks for the detailed reply. had to have a friend print on their machine for me so unfortunately can’t rate. but can comment on the quality of this design. thanks for sharing with the community!

@STALKERSKI

hi, can you recommend some suppressors for this model

The designer has replied

Show original

@atp.

hi buddy, took some pics with my models. you can find them on my profile. the blackveil I think is the best fit for the Nova.

@STALKERSKI

Replying to @atp. :

wow the blackveil version superssor are suitable with nova 45 perfect thank you!

@atp.

Replying to @STALKERSKI :

no problem buddy. happy printing ! 🫡

@jordan7831

amazing model! would love to print this for mine. but I think it’s too tall for my a1 mini. is it possible to split into two pieces?

The designer has replied

@atp.

hi, sadly it can't be split in two because the model was made to be as compact as possible. spliting it in half would compromise the whole build. if you want you can try my Blackveil modular kit for the AAP, that one is more robust and it has multiple parts that fit on the a1 mini build plate.

@jordan7831

understood thanks for the reply! I don’t know how the upper portion will react with a bed slinger lol

@atp.

Replying to @jordan7831 :

i think it will do okay because the slicer is set to 0.2 high quality that has slow speed printing

@STALKERSKI

Print Profile

0.2mm layer, 3 walls, 20% infill

crazy kit

No more

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Modern Headphone Stand 01

JAM3D l Adriana Angélico

28.2 k

6.2 k

Jeep Kit Card

agepbiz

70.9 k

22 k

R5 Turbo2 - Kit Card

Kocyns

19.5 k

14.5 k

Formula 1 Kit Card

TSmitty3D

28.9 k

13.4 k