Grady White Adventure 208 Rear Seat Bins
Print Profile(0)
Description
This model is for rear storage bins for a 1997 and newer Grady White Adventure 208. The models works for either port (left) or starboard (right) seats and is intended to mimic the bins that were factory options. The model is optimized to have as much internal volume as possible while fitting into a 300mm x 300mm x 320mm build volume when oriented as shown.
This likely will fit other Grady White models from the late ‘90s and early 2000s. Refer to the dimensional drawing for width, length, and depth. The depth will clear standard Group24 batteries installed under the Starboard seat and will also clear the stock 2.5gallon Yamaha 2stroke oil tank (if equipped) under the port seat.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)