Xiaomi Mi Vacuum Dock For Skadis

Xiaomi Mi Handheld Vacuum Skadis Mount (with USB-C Charging)
Keep your Xiaomi Mi Handheld Vacuum charged, organized, and ready to use with this minimalist, functional IKEA Skadis pegboard mount. Designed to perfectly complement the Xiaomi aesthetic, this dock holds your vacuum securely while providing integrated USB-C charging.

Features

• Built-in Charging: Features an integrated routing path specifically designed for standard Apple USB-C charging cables.
• Zero-Wasted Pegboard Space: Slim profile engineered to fit perfectly flush next to other Skadis mounts without blocking adjacent slots.
• Xiaomi Design : Form follows function. The mount mimics the clean, minimalist lines of the vacuum itself.
• filiment-Friendly Design: Optimized geometry to use minimal filament while maintaining high structural strength.
• Material Flexibility: tested and prints perfectly in both PLA and PETG.

Assembly Instructions

1. Route the Cable: Feed your USB-C cable through the hole at the bottom of the main dock.
2. Install the Clip: Slide the printed securing clip over the USB-C connector head.
3. Lock it in Place: Pull the cable back down. The securing clip will prevent the cable from falling out the bottom (refer to the gallery images for a visual guide).
4. Secure the Connector (Optional): To stop the cable from pulling upward when you lift the vacuum, tighten a single M4 screw (8mm–16mm length) into the back. Alternative: If you do not have an M4 screw, a small strip of paper wedged into the slot will provide enough friction to hold it.
5. Mount & Power: Simply hook the assembly into your IKEA Skadis board, plug it into a suitable USB power source, and your dock is ready!

Note: If there is enough interest, I will release a second version specifically toleranced for the original Xiaomi USB-C cables. Let me know in the comments!