Water Hose Holder D16–D32

Practical Hose Holder for Water Hoses

These compact hose holders ensure clean and secure routing of water hoses on walls, garden sheds, raised beds, greenhouses, or other solid surfaces

Thanks to the open clamping design, the hose can be quickly clipped in and easily removed again if needed. This keeps the hose neatly routed, reduces kinking, and prevents it from lying inconveniently on the ground

The set includes multiple sizes for different hose types and each refers to the outer diameter of the hose:

• D16
• D20
• D23
• D25
• D32

The hose holder is provided with a countersink for M4 countersunk screws

This makes the holders suitable for both irrigation systems and classic garden and water hoses

🔧 Features

• Available in D16, D20, D23, D25, and D32
• Quick insertion and removal of the hose
• Open clamping design
• Space-saving construction
• Easy wall mounting
• Ideal for garden and irrigation systems
• Support-free printing

🌿 Usage

Perfectly suited for:

• Garden irrigation
• Drip irrigation systems
• Greenhouses
• Raised beds
• Garden sheds
• Workshop and garage
• Organizing and guiding water hoses

The holders are simply attached to a suitable surface and reliably keep the hose in place

🖨️ Printing Instructions

• Material: PETG / ASA
• Supports: ❌ no supports
• Layer height: 0.12 mm
  • to print the hole cleaner
• Infill: 20–30%
• Wall lines: 3–4 recommended
• the part is intentionally printed in this orientation to increase stability

💡 Note:
For outdoor use, PETG or ASA is recommended, as these materials are significantly more resistant to moisture and UV radiation

If you like the model, I would appreciate a Like 👍 or a Make! 🚀

Don't miss my other models on my profile.

https://makerworld.com/en/@Chakalaka/upload

If you want to support me once, you have the opportunity here, thank you very much