Big Workshop Funnel for 5L Bottles & Canisters

Big Workshop Funnel for 5L Bottles & Canisters

A large one-piece utility funnel for workshop, garage and DIY use.

Big Workshop Funnel is a large printable funnel designed for pouring liquids into 5L bottles, canisters and similar containers. It has a wide bowl for easier pouring, a long universal outlet for common container neck sizes, a hanging handle for storage and a raised splash guard that helps reduce splashing during use.

The model is intended as a practical workshop tool for general non-food liquid transfer, garage work, maintenance, refilling and DIY use.

Features

• Large wide funnel bowl
• One-piece print
• Universal outlet for many common bottle and canister necks
• Raised splash guard to help reduce splashing
• Flat handle with hanging hole
• Easy to store on a hook, pegboard or workshop wall
• Useful for 5L bottles, canisters and similar containers
• Simple, practical design for workshop and garage use

How it works

Place the outlet into the neck of your bottle or canister, hold the funnel by the handle if needed, and pour slowly into the wide bowl.

The raised splash guard helps reduce accidental splashing, especially when pouring from larger containers or when the liquid flow is not perfectly controlled.

The handle can also be used to hang the funnel when it is not in use.

Suggested uses

This funnel is suitable for:

• garage and workshop fluids,
• oils and lubricants,
• cleaning liquids,
• refill liquids,
• DIY and maintenance work,
• 5L bottles and canisters,
• general non-food liquid transfer,
• hanging workshop storage.

Printing notes

This model prints in one piece, with no extra adapters, rings or assembly required.

Because it is a large funnel, make sure you have enough bed adhesion and use print settings suitable for larger functional parts.

For better strength and liquid resistance, consider using enough walls/perimeters and a suitable material for your intended use.

Material note

This is a printable workshop utility funnel. Chemical resistance, heat resistance and liquid compatibility depend entirely on the filament used and your print settings.

Always check whether your chosen material is suitable for the liquid you want to pour.

Not recommended for hot liquids, aggressive chemicals, fuels or food contact unless printed from a suitable material and used at your own responsibility.

Recommended setup

Recommended for general workshop use:

• Print in one piece
• Use a practical functional material suitable for your intended liquid
• Use enough walls/perimeters for strength
• Check for leaks before first real use
• Test with a small amount of liquid first

Notes

The outlet is not designed for one specific bottle thread or neck size. It is intended as a universal-style outlet that should fit many common 5L bottles and canisters.

Fit may vary depending on the exact container type, neck shape and opening size.

The splash guard helps reduce splashing, but it does not make the funnel spill-proof. Pour slowly and carefully, especially with thicker liquids.