Toilet Paper Cutter Strip - 3 Types

Description

This is a set of serrated cutter strips designed to be attached to an existing toilet paper holder.

It helps you tear toilet paper more easily without replacing the entire holder.
Attach the cutter strip to the underside or inner front edge of your existing toilet paper holder, then pull the paper against the serrated edge.

This model includes three different types.

Included Types

Type A - Stick-on Type

Type A attaches with double-sided tape.

The serrated edge has a relatively gentle angle. It is designed for smooth and natural tearing, and works well if you want a simple add-on part that does not change the look of the holder too much.

Type B - Stick-on Type

Type B also attaches with double-sided tape.

The serrated angle is different from Type A. It catches the paper a little more strongly, so it may work better depending on your toilet paper, holder shape, and preferred tearing direction.

Try Type A and Type B to see which one works better for your setup.

Type C - Clip-on Type

Type C is designed to fit over the front edge of the existing toilet paper holder.

It is useful if you do not want to use double-sided tape. However, because toilet paper holders come in many different shapes and thicknesses, Type C may not fit every holder.

How to Use

For Type A and Type B:

1. Apply double-sided tape to the flat side of the part.
2. Clean and dry the mounting area on the underside of the toilet paper holder.
3. Attach the cutter strip to the underside of the front edge of the holder.
4. Press firmly for a few seconds to make sure the tape sticks securely.

For Type C:

1. Slide or clip the part onto the front edge of the holder.
2. Make sure it is securely fitted before use.

After installation, pull the toilet paper against the serrated edge to tear it more easily.

Notes

This is not a sharp metal blade.
It is a 3D printed tear-assist part with a serrated edge.

The cutting performance may vary depending on the type of toilet paper, the shape of your holder, and how the part is installed.

If the part comes off easily, use stronger double-sided tape or adjust the mounting position.

Please be careful when installing this in places where small children can reach it.

Recommended Filament

PLA and PETG are both suitable.

PLA is easy to print and works well for normal indoor use.
PETG is recommended if you want slightly better flexibility and durability.

Transparent or translucent filament is a good choice because it blends naturally with many existing toilet paper holders.