Cassette Tape and Walkman Slider + Flip Fidget

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance (do not over twist), then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

Rewind to the good old days… then flip and fidget.

This retro cassette fidget is packed with more moves than your favorite mixtape — flip it, slide it, twist it, spin it, and snap it like you’re rewinding Side A for the 100th time. No pencils required (if you know you know…).

Choose your throwback vibe: a classic cassette (Side A/B, of course), a full Walkman setup with headphones for maximum 80s energy 🎧, or a Walkman without headphones (because they’re probably tangled anyway). We included some fun details on this one including A side and B side and a belt clip on the Walkman. Warning: may cause sudden urges to make a mixtape and say “this one’s a banger.”