VRD Battery Tray - Stubby Version
Print Profile(1)
Description
This battery tray is designed for the Vanquish VRD RC Crawler. This tray relocates the battery to the front of the vehicle, above the servo. The cross braces is designed to allow it to be used with “Stubby Kit”, which relocates the servo to mount on the axle. Battery tray dimensions are 64mm x 37mm. I use a 3S Ovonic 850 mah battery I picked up on Amazon. I also use a velcro strap which is smaller than the stock Vanquish strap to secure the battery.
If you enjoyed this model, please consider supporting me with a like.
I suggest PETG HF or PCTG filament with at least 35% infill. The tray is secured using two M3 x 10mm flathead screws, while the cross brace uses four M3 x 12mm to secure to the chassis.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)