GT3 rs key hanger V2

This version recreates the front end of the Porsche 911 GT3 RS, one of the most extreme variants of the historic Porsche 911 developed by Porsche for the track.

The acronym RS (Rennsport) has for decades identified the most performance-oriented versions, and in the 992 generation, the GT3 RS front end was designed with aerodynamics heavily inspired by motorsport.

The model highlights the large air intakes, sculpted hood, and aggressive look typical of the GT3 RS, interpreting one of the most recognizable front ends in the Porsche world.

Given the interest generated by this car, this time I also wanted to offer its extremely fierce front end!

Assembling the model is really very simple. For some internal parts, small pliers will be useful to easily remove some supports; don't worry, they won't be glued but simply awkward to remove by hand and, as always, they won't leave any visible marks on the model.

For the headlights, I used a silver silk filament; I recommend it because it offers beautiful reflection effects, but I imagine white would also work very well if you don't have silver available.

IMPORTANT UPDATE!

Given the numerous problems encountered when printing the rims, a modification has been made to strongly increase adhesion to the print bed. The profile includes supports that should be removed gently. They will detach very easily, but to remove them from the rim, a couple of cuts will be needed! Nothing difficult. However, by performing several tests, I managed to print them easily even completely WITHOUT supports, and it worked well.

Your feedback is important; if you have any problems, don't hesitate to tell me, accurately explaining the situation, this helps me solve any issues faster! Thank you!

I hope you like it and that this version is appreciated! Happy printing everyone!