Pillar of Light- Elegant Table Lamp - Free 3D Print Model

Search models, users, collections, and posts

G.M. 3D

Household>Decor

IP Report

Print Profile(3)

All

H2S

H2D Pro

H2C

H2D

A1 mini

X1E

P1P

P2S

X1 Carbon

X2D

P1S

A2L

Shade Base- 0.2mm layer, 3 walls, 10% infill

Designer

1.5 h

1 plate

5.0(2)

Shade- 0.24mm layer, 1 walls, 0% infill

Designer

6.6 h

1 plate

5.0(1)

Base with E27 Bulb holder- 0.2mm layer, 3 walls, 7% infill

Designer

2.3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

204

772

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

Translucent Olive (32500) / Refill / 1 kg

PETG Translucent

Description

Pillar of Light- Soft Table lamp

A modern and elegant ambient lamp designed to bring a warm, cozy atmosphere into any space.
Pillar of Light features a ribbed translucent design that creates beautiful vertical light diffusion and a premium architectural look.

Printed in PETG Translucent Olive, the lamp glows with a soft golden warmth when illuminated, making it perfect for desks, shelves, bedrooms, living rooms, or mood lighting setups.

Features

Elegant modern ribbed design
Uses standard E27 light bulb
Optimized for PETG Translucent
Warm and soft ambient lighting
Easy and quick assembly (Assembly process shown in GIF below.)
No supports required
152x152x220 mm dimensions

Assembly

Glue the Shade and Shade Base together (hot glue is recommended for the best result).
The middle pillar section may develop small cracks during assembly — this is normal and does not affect functionality, as long as the part does not fully break off.

Glue the E27 lightbulb holeder to the Base using holt glue or CA glue.
Install lightbulb socket, secure with this fixture nut E27 fixture nut (print this model if you don't have enough fixture nuts). Screw in the E27 lightbulb
Align the Shade with the extrusions on the Base, then press the Shade down onto the Base. It should snap into place and hold securely without additional fastening.

⚠️ Use LED bulbs only — regular incandescent bulbs can generate too much heat for 3D printed parts.

Check out my other lamps in my profile!

Membership

If you want to sell prints of this model, consider the commercial license!

Join

Boost Me (for free)

If you liked this model, a Boost 🚀 would mean a lot. Thanks for supporting my work!

Comment & Rating (7)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.