Angry Flork with Flip-flop in Hand (Flork Memes)

For the best visual result and to avoid failures in the flip-flop miniature and the arms, follow these recommendations:

• Layer Height: 0.16mm or 0.20mm (0.12mm on the upper curved parts if you want to further hide the expression lines).
• Walls (Wall Loop): 2 or 3 to ensure good strength in the thin arms.
• Infill: 10% to 15% (Gyroid or Grid).
• Supports: Yes. It is recommended to use Tree Support only touching the build plate (On build plate only). They are ideal for supporting the arm with the flip-flop and the hand on the waist, being extremely easy to remove without marking the part.
• Build Plate Adhesion (Brim): An external Brim may be necessary if your build plate adhesion is not 100%, as the base is slightly oval.