FYTY112

cover

E🐉 Espada del Destino Marcapáginas Rúnico Este marcapáginas no es solo un accesorio, es una declaración de intenciones para cualquier lector de épica y alta fantasía. Con un diseño que evoca leye(27).png

photo_2026-05-23_14-47-51.jpg

plate_1.png

ed1c6c8ef5e6129a.png

0.08mm layer, 1 walls, 95% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002838084/design/f5628d7dd61d5add.png"></figure><ul><li><h2><strong>Boquilla recomendada:</strong> 0.4 mm</h2></li><li><h2><strong>Altura de capa:</strong> 0.08 mm (con una primera capa a 0.16 mm para una base sólida).</h2></li><li><h2><strong>Relleno:</strong> 95% </h2></li><li><h2><strong>Soportes:</strong> No requiere.</h2></li><li><h2>¡Espero que disfrutéis imprimiéndolo tanto como yo diseñándolo! Si lo imprimís, me encantaría ver vuestros resultados en los comentarios.</h2></li><li><h2><strong>Diseñado por @FYTY112</strong></h2></li><li><h2><strong>Consejo extra:</strong> Asegúrate de subir una buena foto del marcapáginas a contraluz o con una iluminación lateral suave en tu perfil de MakerWorld; eso resaltará las texturas  y hará que el diseño destaque mucho más en las búsquedas.</h2><p>&nbsp;</p></li></ul>

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002838084/design/f5628d7dd61d5add.png"></figure><ul><li><h2><strong>Recommended nozzle:</strong> 0.4 mm</h2></li><li><h2><strong>Layer height:</strong> 0.08 mm (with a first layer at 0.16 mm for a solid base).</h2></li><li><h2><strong>Infill:</strong> 95% </h2></li><li><h2><strong>Supports:</strong> Not required.</h2></li><li><h2>I hope you enjoy printing it as much as I enjoyed designing it! If you print it, I'd love to see your results in the comments.</h2></li><li><h2><strong>Designed by @FYTY112</strong></h2></li><li><h2><strong>Extra tip:</strong> Make sure to upload a good photo of the bookmark with backlighting or soft side lighting to your MakerWorld profile; this will highlight the textures and make the design stand out much more in searches.</h2><p>&nbsp;</p></li></ul>

Print Profile(1)

Description

Recommended nozzle: 0.4 mm

Layer height: 0.08 mm (with a first layer at 0.16 mm for a solid base).

Infill: 95%

Supports: Not required.

I hope you enjoy printing it as much as I enjoyed designing it! If you print it, I'd love to see your results in the comments.

Designed by @FYTY112

Extra tip: Make sure to upload a good photo of the bookmark with backlighting or soft side lighting to your MakerWorld profile; this will highlight the textures and make the design stand out much more in searches.

Comment & Rating (0)

License

Related Models

Zombie Siege Bookmark