Polyform Lamp

Polyform Lamp

Use as pendant or table lamp

Please note that this model is free for personal use only. If you wish to sell prints of this model i refer you to my commercial license membership

Available in 3 sizes Small, Medium and Large

(DxWxH)

Small:  180 x 180 x 165mm A1-Mini compatible. *Only E14*

Medium:  216 x 216 x 200mm A1, P1S, P2S etc. compatible *E14 and E27*

Large:  314 x 314 x 288mm H-series compatible *E14 and E27*

Print-profile info

Each size of shades has its own print-profile

You need to print one “shade” and “Holders” profile for a complete lamp 

Assembly

If you are unsure about doing this, ask someone to help you!

Assembly is pretty traight forward, just follow the picture below. If your lamp-socket has a moulded-in “shoulder” you can start with the other end of the cable and put the power plug in first (the one you connect to a outlet)

First and foremost, unplug the cable. 

Loosen the small plastic screw in the strain-relief, (marked with red circle) that holds the cable, almost all the way out. Then unscrew the whole cable strain-relief from the socketholder. Make sure you DON'T twist the cable as you unscrew it.

Place both “holders” as pictured and then do everything in reverse, scew in the strain-relief and lastly the small plastic screw.

Happy printing :)

**Use only LED-Lights**