Strong Easy Fast Spool Respooler (100% printed)

Search models, users, collections, and posts

Tomik s Cuprou

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

H2D

H2S

H2C

X1E

X1 Carbon

X2D

P1P

P2S

H2D Pro

A2L

Default profile - PLA + PETG

Designer

9.5 h

2 plates

5.0(32)

Default profile - All in PETG

Designer

10.4 h

2 plates

4.9(14)

Default profile - All in ASA

Designer

9.6 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

1522

5230

1.3 k

704

Released

Description

Boost Me (for free)

TRY MY NEW STRONGEST RESPOOLER:
https://makerworld.com/en/models/2869941-fast-strong-easy-respooler-only-one-print-plate

Filament Spool Respooler (Fast Print, High Strength)

This is a compact, robust, and efficient manual filament respooler designed to easily transfer filament from one spool to another (perfect for switching from cardboard to plastic spools or splitting large rolls).

It is optimized for quick printing and structural strength, requiring only around 360g of filament in total.

✨ Key Features

Full Compatibility: All parts are fully backward compatible with my previous respooler designs.
Material efficient: Only needs ~360g of filament.
Fast & Easy assembly: Print, snap together, and start respooling.
No extra hardware: 100% printed components.

🛠️ Print Settings & Recommendations

Material: * Ideal: Print the entire model in PETG or ASA for maximum durability and strength.
- Hybrid Option: If you want to save material, the main frame can be printed in PLA. However, it is highly recommended to use PETG or ASA at least for the axles (spindles) and the crank handle to handle the mechanical stress.
Infill: 10% Gyroid is more than enough for great structural integrity.
Supports: Only required for the crank handle. Everything else prints completely support-free.

Comment & Rating (80)

@user_3374114187

Boosted

Pinned by Designer

This printed and word great! Had a need and this seemed the best option for me. Simple and effective.

The designer has replied

@tomi2k9

Thx for photo :)

@jdiz4riz

Boosted

Print Profile

Default profile - PLA + PETG

This is a super helpful print. it worked very well when one of my spools broke. The only thing I would change is I would make one end higher to accommodate spools with larger centers. The spool that we were transferring from had a large opening and would drag and catch on the lower bar, but we still made it work. It’s not an issue with most of our spools, so this will still be super helpful again in the future.

The profile uploader has replied

@tomi2k9

Hi, what was that problem spool? I look on it? Thx for tip, ill made secont profile with one side higher.

(Edited)

@user_189658913

Most usefull product I have ever printed. Turned out great!!!

@Olaf3D

Boosted

Very good to print. I was also able to rewind the first roll without any problems. What might also be useful is a guide that winds the filament evenly onto the new spool. Boost is out ;-)

Show original

@LCaddell

Boosted

I really like this design, works well but I'd recommend printing the shaft connecting the handle at 100%. The original worked for 2 spool windings and snapped right off. Since reprinting at 100%, works like a charm.

(Edited)

@NeroStivale

Boosted

Print Profile

Default profile - All in PETG

perfetto

The profile uploader has replied

@tomi2k9

Thank you :)

@NeroStivale

Boosted

Replying to @tomi2k9 :

If I may offer a suggestion, adding a filament guide between the two spools, perhaps an arm with an eyelet, would be ideal

Show original

@Gilmara30

can it be done all in PLA

The designer has replied

Show original

@tomi2k9

Yes, but pins maybe will not working forever... But you can print them agin, when they will break later...

@petervanderwijn

If you want to save material, the main frame can be printed in PLA.

@Gilmara30

Replying to @tomi2k9 :

thank you

Show original

@user_3821238935

Why do I have a pin left over? What am I doing wrong :)

The designer has replied

Show original

@tomi2k9

You're not doing anything wrong. One is just an extra, just in case.

@user_3821238935

Replying to @tomi2k9 :

ohhh Thx :)

@user_196682016

Print Profile

Default profile - PLA + PETG

Nice, easy print that works as is.

@Rackner

Print Profile

Default profile - All in PETG

very impressive print! Great work Will test it soon

Show original

@user_2636314163

Print Profile

Default profile - All in PETG

works great. nice and sturdy

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.