X2D U-shaped Reverse Filament Switcher Feed Bracket

Based on a remix of a platform model, by directly reversing the installation direction of the diverter, it solves the pain point of filament tube routing for some users whose AMS is not on the right side of the 3D Printer, reducing the routing distance and resistance of the feed tube, allowing the filament to turn more smoothly and elegantly

It is recommended to print with high-temperature resistant materials such as ASA, as PLA will directly soften and deform when active chamber heating is enabled (the degree of deformation is unacceptable)

During the remix process, the original vertical mounting holes were not deleted. If you find it more suitable to install vertically after printing, there will be no waste of the 3D Printed product. At the same time, I provide three reverse mounting hole positions, which can be adjusted left and right to three gears according to the length of your feed tube, choose the appropriate mounting hole position for installation. Each installation method is fixed with two screws. Whether installed vertically or horizontally in reverse, there will always be a suitable one among the four hole positions. The entire bracket is fixed to the machine via a slide rail buckle. First, screw the diverter onto the bracket, then install the entire assembly onto the machine

Original author model link

https://makerworld.com/en/models/2392602-x2d-filament-guide-switch-vertical-bracket#profileId-2740275