Dirtbike Boot Wash Stand with Handle
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
If you like the design and it improves your life, leave a boost, it helps a lot.
I put a good amount of effort testing these models and sometimes having to reprint and test again.
Thanks and I appreciate it.
Made this wash stand as I couldn't justify spending $80 on one.
Have used this a bunch of times and it works really well. You can get to all the areas you need with a pressure washer without getting water inside your boots. Leave them on there and let them dry.
The holes in the pieces are threaded to ¼" course thread. I used 1" length bolts on everything except the base extension piece. I used ¾" bolt on those.
So you will need:
- 10 - 1 or 1 ¼" bolts
- 2 - ¾" bolts
- 12 washers
This is a long print but well worth it in my mind. I spent alot of time designing this, so if you have any comments please feel free to comment and I can make changes. If there is interest in a metric tapped version I will make one.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)