Kira AI Assistant

DISCLAIMER: PLEASE BE CAREFUL AND WORK IN A SAFE ENVIRONMENT AT ALL TIMES. MAKE SURE TO WEAR SAFETY GLASSES AND GLOVES. BE CAUTIOUS AT ALL STEPS TO AVOID ANY DAMAGE.

Kira is a compact AI voice assistant designed for your desktop. It can answer your questions whenever you want. Just say, “Hey, Kira!”.

All mechanical parts can be 3D printed. Electronic components must be purchased using the links below. Download firmware using the link below. Please carefully read the assembly instructions.

1. XIAO-ESP32S3-Sense v24    
2. Speaker    
3. Amplifier    
4. Mini Breadboard    
5. SH1107 OLED Display   
6. Any M2x8mm self tapping screws
7. Any M2x4mm self tapping screws
8. Jumper wires (any other equivalent is fine)
   
   Download firmware. Use Espressif flash tool to flash the firmware.
   I recommend Light Khaki colour PLA
   
   Try github repository to download the firmware if google drive link does not work.
   
   Note: You don't need camera of ESP32 S3 Sense for this project. You can unplug it or just leave it as is.