the_maniac007

cover

Buchse unten

plate_1.png

Buchse oben

plate_2.png

98a12e59975cfe00.jpeg

<ul><li>0.16mm layer</li><li>10 walls</li><li>100% infill</li><li>0,4mm Düse</li><li>Stützstruktur normal auto</li><li>Brim 5mm</li></ul>

<ul><li>0.16mm layer</li><li>10 walls</li><li>100% infill</li><li>0.4mm nozzle</li><li>Normal auto support structure</li><li>Brim 5mm</li></ul>

PA6-CF upper & lower bushing

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Lasst doch gerne als kleine Unterstützung einen Boost da :)</boostcontent></boostme>obere &amp; untere Kunststoffbuchse für Jaguar Lenksäule&nbsp;passend für folgende Fahrzeuge:<ul><li>Daimler 250 V8 Limousine (1962-69)</li><li>Mark II (1961-69)<ul><li>2.4 ab 114850 und 127056</li><li>3.8 ab 230141 und 222242</li><li>alle 240er und 340er Modelle</li><li>3.4 ab 162489 und 178975</li></ul></li><li>Jaguar: E-Type 3.8 ab 850588, 878037, 860863 und 886754 sowie alle 4.2 Serie 1 und 1.5 (1962-68)</li><li>Panther J72 Serie 1</li></ul>habe diese aus PA6 gedruckt und anschließend mit Lagerfett gefettet. Ebenfalls sind Gleitfilamente mit PTFE Anteilen oder IGUS Filamente bestens geeignet.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Feel free to leave a boost as a small token of support :)</boostcontent></boostme>upper &amp; lower plastic bushing for Jaguar steering column&nbsp;suitable for the following vehicles:<ul><li>Daimler 250 V8 Saloon (1962-69)</li><li>Mark II (1961-69)<ul><li>2.4 from 114850 and 127056</li><li>3.8 from 230141 and 222242</li><li>all 240 and 340 models</li><li>3.4 from 162489 and 178975</li></ul></li><li>Jaguar: E-Type 3.8 from 850588, 878037, 860863 and 886754 as well as all 4.2 Series 1 and 1.5 (1962-68)</li><li>Panther J72 Series 1</li></ul>I printed these from PA6 and then greased them with bearing grease. Lubricant filaments with PTFE components or IGUS filaments are also ideally suited.

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License