Shower Corner Shampoo Shelf (With Removable Hooks)

Tired of flimsy shower caddies that rust or slide down the pipe? This sleek, modern corner shower shelf is designed to maximize your space while keeping everything secure, organized, and draining properly.

It features a clean geometric drainage grid on the bottom, ventilated front/side cutouts to prevent water pooling, and two optional, snap-on hooks perfect for hanging loofahs, brushes, or squeegees.

📐 Dimensions

• Corner Sides: $8\ \frac{7}{8}\text{''}$ (Fits standard $90^\circ$ shower corners perfectly)
• Depth/Height: $2\text{''}$

🛠️ Installation Instructions (No Drilling Required!)

To keep the design clean and undamaged by screws, this shelf is engineered to be mounted using high-strength adhesive tape.

• Recommended Tape: 3M Automotive Super Strength Double-Sided Adhesive Tape 1/2'' wide x 5 ft roll). It's completely waterproof, handles high humidity effortlessly, and can be found easily in the automotive section at Walmart or online.
• Prep: Clean both the tile/shower wall and the back edges of the shelf with rubbing alcohol to remove any soap scum or oils.
• Apply: Run a strip of the 3M tape along both of the $8\ \frac{7}{8}\text{''}$ back edges, press firmly to the wall, and let the adhesive cure (ideally 24 hours) before loading it up with heavy shampoo bottles.

🖨️ Recommended Print Settings

• Material: PETG or ASA/ABS is highly recommended for hot, humid shower environments. (PLA may deform over time under heavy loads or hot water).
• Infill: 15% – 20% (Gyroid recommended for strength).
• Walls/Perimeters: 3–4 walls for structural rigidity to support heavy bottles.
• Supports: The main shelf prints flat on the bed and shouldn't require supports. The snap-on hooks can be printed flat on their sides.

If you like this design, please leave a ⭐⭐⭐⭐⭐ review and post your makes! Happy printing!