Urban Arrow Charging Station

This 3D-printed wall mount was designed for the charging station and charging accessories of my Urban Arrow with a Bosch battery system. It consists of two separate holders: one for the Bosch battery and one for the Bosch charger. This allows the battery and charger to be mounted cleanly, space-savingly, and within easy reach on the wall.

The photos show the first version of the mount. In the current version, only the angle of the battery holder has been adjusted. This adjustment should improve the function or optimize the battery's position, but the basic design remains the same.

For wall mounting, I used M6x30 screws, suitable for concrete walls. Important: Each mounting hole is designed for its own screw. This ensures the mount sits stably on the wall.

The Bosch charging accessory sits a bit loosely in the holder, but still works very well and reliably stays in place.

Version Adjustments

Current Version - V2

• Battery holder angle adjusted
• Better battery positioning expected
• No further major changes
• Should still work with the same mounting method

Version 1

• First printed and tested version
• Separate holder for battery and charger
• Mounted with M6x30 screws in concrete
• Charger sits a bit loosely, but is functional