Predator Plasma Cannon 1987 movie with wall mount

This is an adaptation of Martin.taichl's awesome design of the Predator's plasma caster.  I wanted to mount it on my wall for display next to my predator mask.  I created a pivoting wall mount that matches the design style of the predator's shoulder mount in the movie.  It attaches to a fixture that you screw to the wall using #6 or #8 screws.  The plasma cannon sits snugly on the wall fixture.  To remove it from the wall, simply lift it up a bit and slide it off the wall fixture.

PRINTING: All the parts for the plasma cannon are colorized and are on a single build plate.  The wall mount is on the second build plate.  

Assembling the wall mount is pretty straight forward.  I used 2-part epoxy to glue the halves together and a clamp to hold the halves tight while the epoxy hardened.  Be sure you assemble the hinges together while gluing the part halves.

Predator mask can be found here:

Predator Helmet with Braids 1987 original movie - Free 3D Print Model - MakerWorld