first fully functional, NBA-sized Basketball Hoop

🚀 New & in pre-launch: my CableDuct & LED Channel Configurator — duct, cover, corner & LED-strip parts in any size, print-ready STL/3MF.

▶ Try it free: cforms.org   

★ Follow the campaign: https://makerworld.com/crowdfunding/305-cableduct-led-channel-configurator

A fully functional, regulation-size 3D printed basketball hoop designed around a cable-tensioned PETG-CF rim.

The rim is built from multiple burgundy PETG-CF segments that are connected with blue PETG connector pieces. During assembly, the vertical TPU net parts are inserted directly between the ring segments. A 2 mm stainless steel cable runs through the inside of the rim and is strongly pre-tensioned with an M6 screw and nut, giving the hoop its stiffness and strength.

The white TPU damper sits between the rim and the rear mounting part to absorb impact when the ball hits the rim. The flexible TPU net is completed after the rim has been tensioned.

### Key Features

- Regulation-size basketball hoop design
- Cable-tensioned rim for increased stiffness
- Burgundy rim and mounting parts printed in PETG-CF
- Blue connector pieces printed in PETG
- Flexible white TPU net
- TPU damper for impact absorption
- Designed for real basketball shots
- Fully 3D printed structure with simple hardware

### Required Hardware

- 2 mm stainless steel cable
- M6 screw
- M6 nut
- Washers, if needed
- Suitable screws and anchors for mounting

### Material Guide

- Burgundy parts: PETG-CF
- Blue connector parts: PETG
- White net and damper parts: TPU

### Important Safety Note

This hoop is made for shooting practice, not for hanging or dunking. Always mount it to a strong wall, plate, or support structure, and check the cable tension, connectors, screws, and TPU net parts regularly.

⚡ Any-size cable ducts & LED channels, print-ready. ▶ Free: cforms.org  ★ Campaign: https://makerworld.com/crowdfunding/305-cableduct-led-channel-configurator