Window Opening Restrictor Comb Cover Cap

EN

Protective cover cap for the mating side of a window opening restrictor comb.
Designed for installations where the restrictor is mounted directly to the window frame instead of under the window handle — useful for non-standard handles, aluminum windows, or custom mounting positions.

The cap improves appearance and helps prevent dust buildup.

Designed for easy support-free 3D printing.

PETG is recommended for long-term durability and resistance to heat and UV exposure. ASA is also a great option for maximum outdoor durability, while white PLA should still work reasonably well indoors.

Suitable for common PVC/uPVC window restrictor comb hardware (as shown in the photos).

The cap provides 2 mm clearance for wafer head screw heads, though countersunk screws should also work fine.
Make sure to account for your window construction to avoid hitting any internal hardware or glass reinforcement.

The longer screws shown in the photos are for demonstration purposes only. In most cases, 13 mm screws should be more than sufficient, while anything longer than 19 mm is likely unnecessary.

RU

Крышка-заглушка для ответной части оконной гребенки-ограничителя.
Полезна при установке гребенки напрямую на раму, без крепления под ручку окна (в моем случае на окне были нестандартные алюминиевые ручки с другим креплением)
Рекомендуемый материал — PETG или ASA, но белый PLA в помещении тоже прослужит довольно долго.
Подходит для распространенных пластиковых и металлических гребенок (см. фото).