Baroque Hyena Carnavalesque Mask

For any commercial license or support, my Patreon is available here : Patreon or Makerworld membership

THE MODEL :

Embrace non-conformity with this bold art piece that shakes up the traditional codes of Venetian salons. Inspired by the fierce features and expressive jaw of the hyena, this masquerade mask fuses a predatory nature with the fine detailing of opulent scrolls and theatrical flourishes. Its large, chiseled ears and subtle grin evoke the mysterious laughter, mischief, and deceptive roleplay of historical masquerades. This is the perfect accessory to embody a sharp character, a charismatic antihero, or to add a touch of untamed yet refined wildlife to your collection.

Tested Print Settings (Recommendations): The fierce and detailed architecture of this piece has been fully validated using matte black PLA.

• Infill: Tested at 5% for display pedestal staging. Handy Tip: If you intend to hit the dance floor or wear it actively, push the infill up to 15-25% to strengthen the frame and the strap attachment areas.
• Nozzle: 0.4 mm
• Supports: Recommended under the prominent ears and snout area for a clean finish.

Sizing Information: This file is provided at human scale. Please feel free to freely rescale the model inside your slicer to match your specific facial anatomy, or downscale it to turn it into a sophisticated table centerpiece ornament.

INFORMATION:

A common question is: why do these prints require supports when they could be printed lying flat?

For my designs, I deliberately choose to print them standing upright rather than flat, in order to achieve the best possible level of detail. I prioritize visual quality over saving a few grams of filament.

Of course, you are free to change the print orientation in your slicer if you prefer.

FILES :

All models are available for download in 3MF format. We recommend using Bambu Studio (Bambu Lab's slicer), as some specific modifications may only be visible within this software.