Karlz Ducati V2 Brake Ducts For Showa/Brembo
Print Profile(1)
Description
Karlz Ducati V2 Brake Ducts For Showa/Brembo
Karlz Completed Version Done and available for Downloads!
Working on other Versions! so check back!
Version that are done!
1199/1299 Ohlins Forks and Brembo calipers!
V2 with Showa forks and Brembo calipers!
V4 with Showa forks and Brembo calipers!
working on!
ducati 899
ducati v4s
maybe cbr 1000
Boost Me (for free)
Although its easy to Leech my Designs an i Dont have to shear! i like to give back to the community! So a small ASK is if you like/use/print my Hours N Hours of Hard work ya Can show some appreciation n support by Boosting my designs :) go`s along way and you will see more Designs from me! :)
anyone who has taken the time to Boost my designs, i want say BIG THANK YOU!
you makes me carry on and do more designs! :) you KNOW who you are! Bless-You! :))))
My brake ducts for Ducati V2 with Showa Forks and Brembos
all my ducts made for Version 1 mount plates will fit this Ducati V2 mount
so if you dont like a logo on ya ducts just go download another of my ducts.
!!!! PLEASE NOTE !!!!
I take no responsibility how you Use/Print/Glue my Show air ducts.
Print in = Minimum ABS and NOT PLA!!!!!
Mounts will need support!!!!
And id print it with 100% infill for strength!!!! ya dont want this coming tobits when out riding!!!!
ABS has significantly better heat resistance than PLA. ABS boasts a glass transition temperature of 105°C, while PLA's is
only 60°C. This means ABS can withstand higher temperatures before warping or deforming, making it a better choice
for applications where the part will be exposed to heat.
=== Glueing Duct to Mount ===
when glueing use Soudal High Viscosity Superglue! PLEASE dont use cheap crap!!!!
surface on duct and mount will need a sand flat befor glueing.
Video how to glue and fit the ducts to your bike
https://youtu.be/C95sgFODxhM?feature=shared
if you like to watch how i got on with this project here are some videos.
https://youtu.be/C95sgFODxhM?feature=shared
https://youtu.be/9h7OS4XL3vM?feature=shared
https://youtu.be/3M150BUo44g?feature=shared
https://youtu.be/7ZTlF73fFeg?feature=shared
https://youtu.be/uX81nkK7mcs?feature=shared
id like to say a BIG thanks to Marze! on here thats help me with pics and loads of test printing and feedback
without him you would not have the V2 version of my ducts.
post some pics,.. id luv to see how they look! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)