Spiral - From the Book of Saw
Print Profile(1)
Description
Model is 133mmx200mm
Created using Chroma Canvas & Hueforge
Project: Spiral.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Dark Red
At layer #13 (1.12mm) swap to Sunflower Yellow
Border Only Colors from here until the end.
At layer #16 (1.36mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)