mg7777

cover

PERCHA GORRA.jpeg

PERCHA GORRAS.jpeg

plate_1.png

8d63d17e586824a9.jpeg

<h3>Recomendaciones de impresión</h3><ul><li>Material recomendado: PLA</li><li>Altura de capa: 0,2 mm</li><li>Relleno: 15–20 %</li><li>Sin soportes</li></ul>

<h3>Printing recommendations</h3><ul><li>Recommended material: PLA</li><li>Layer height: 0.2 mm</li><li>Infill: 15–20 %</li><li>No supports</li></ul>

0.2mm layer, 4 walls, 20% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Percha para 6 gorras</h2><p>Percha de pared diseñado para organizar hasta 6 gorras de forma cómoda, ordenada y sin deformarlas.</p><p>&nbsp;</p><p>Su diseño minimalista permite ahorrar espacio y queda perfecto en armarios.</p><h3>Características</h3><ul><li>Capacidad para 6 gorras</li><li>Diseño compacto y limpio</li><li>Fácil instalación</li><li>Impresión rápida</li><li>No necesita soportes</li><li>Compatible con la todo tipo de gorras.</li></ul><h3>Recomendaciones de impresión</h3><ul><li>Material recomendado: PLA</li><li>Altura de capa: 0,2 mm</li><li>Relleno: 15–20 %</li><li>Sin soportes</li></ul><p>Si lo imprimes, puedes subir una foto de tu resultado 😊</p>

<h2>Hanger for 6 caps</h2><p>Wall hanger designed to comfortably and neatly organize up to 6 caps without deforming them.</p><p>&nbsp;</p><p>Its minimalist design saves space and fits perfectly in closets.</p><h3>Features</h3><ul><li>Capacity for 6 caps</li><li>Compact and clean design</li><li>Easy installation</li><li>Fast printing</li><li>No supports needed</li><li>Compatible with all types of caps.</li></ul><h3>Printing recommendations</h3><ul><li>Recommended material: PLA</li><li>Layer height: 0.2 mm</li><li>Infill: 15–20 %</li><li>No supports</li></ul><p>If you print it, you can upload a photo of your result 😊</p>

Print Profile(1)

Description

Hanger for 6 caps

Features

Printing recommendations

Comment & Rating (1)

License

Related Models

Minimalist cap hanger