Well Hello There –Highland Cow Tealight & LED Lamp

Well Hello There – Highland Cow Tealight & LED Lamp brings a warm countryside charm to any room. The detailed Highland cow scene glows beautifully when lit, creating a cozy, rustic atmosphere perfect for shelves, nightstands, entry tables, or gift giving.

Works great with an LED tealight or small LED lamp insert for a soft, relaxing glow.

*Only intended for LED lights.

The base is designed with for dual light source options, LED lamp kit and LED Tealights. 

 It's designed with a Lockable base system – the votive securely twists into the base so it can easily be moved around and changed.

The base is designed to change with other votives for seasonal decor. For more votive designs to change with, go here: https://makerworld.com/en/collections/23448086-tealight-holders

Alternative Lamp kit and LED Tealight suggestions:

Lamp kit (dimmable and color changing options): https://www.amazon.com/dp/B0GTNZ1FXW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Rechargeable Tealight: https://www.amazon.com/dp/B0F3D2LMZB?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1

Size

Height: ~9cm

With: ~7cm

Filament used

White - Regular PLA - Elegoo

Black - Regular PLA - Elegoo

Printing

• Designed in Fusion 360 for reliable printing
• Use a clean print plate with some glue (unless you are using a super tack plate)
• Use dried out filament
  • (Different filament types impact the print differently, please adjust your settings accordingly)
• No support required
• Fast print time
• No AMS needed

Assembly

1. Align the round locking tabs inside the votive with the cut-out slots in the base. Press down firmly and twist clockwise to secure.
2. To switch to another votive, twist counterclockwise until you feel and hear a “snap,” then lift straight up.
3. Insert the LED lamp either from the bottom vertically through the cut-out section 
   1. OR: Trade the cord from above down through the smaller/thicker cut out section.
4. Align the cord with the arch/cut out section leading outwards and slide the lamp in place.
5. The LED Tea Light fits in the inner round circle.

If you like this design, please leave a rating, or a comment. If you have a pattern or illustration you’d love to see turned into a tealight, feel free to share your ideas!