Bass or Cod Lure 85mm wide
Print Profile(1)
Description
85mm wide lipless crankbait fishing lure, great for fishing for Barra, Murray Cod, Bass or any large fish. Centre laser cut file is included, this could also be made with a wire. Epoxy centre wire/part and the two halves first. Use metho to clear excess glue when gluing. Glue sinkers in at the same time.
Use round sinkers for weights that are about 8.7mm wide. Paint with plastic primer, then coat with enamel white, then airbrush design.
Then coat with a UV clear resin that is set with UV lights. Make sure all holes are filled with putty or with superglue and bi carb soda.
Play around with different infill density to get the lure to work correctly. I used 40% density with a high quality .16 print.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)