Out of the Frame – Manticore Fury

Out of the Frame – Manticore Fury 🦁🦂

Fierce Manticore erupting dramatically from its ornate frame in the Out of the Frame collection. Lion head roaring with jaws wide open, massive bat-like wings spread wide, and scorpion tail raised in aggression while powerful claws grip and shatter the broken edges... mythical terror breaking through reality. Integrated keyhole hanger on the back for easy wall mounting.

Print Profile

• Layer height: 0.12-0.16 mm
• Walls: 2
• Infill: 5-10% Gyroid (infill combination enabled)
• Supports: Tree (auto)
• Fuzzy skin (on variant): point distance 0.2 mm, thickness 0.1 mm

Plates / Variants

1. 100 mm 0.12 layer
2. 150 mm 0.16 layer
3. 100 mm 0.12 layer fuzzy skin
4. 150 mm 0.16 layer fuzzy skin

Key Printing Tips:

• Disable “Strength → Detect Thin Wall” → gives smoother, cleaner surfaces on detailed parts.
• Always check the slicing preview in Bambu Studio before starting the print.
• Support removal trick: Cut supports into small chunks first, then gently loosen → they usually pop off cleanly without damage.
• Some plates use lots of supports, if so → for reliable prints use these filament settings:
  • Filament Overrides
    • Z Hop When Retract: 0.6 mm
    • Z Hop Type: Spiral
    • Travel Distance Threshold: 1 mm
    • ✅ Enable Retract When Changing Layer
  • Also, disable these settings in Bambu Studio if Variable Layer height is used:
    • Supports
      • ❌ Disable Independent Support Layer Height
    • Others
      • ❌ Disable Reduce Infill Retraction
    • I’ve found that a 0.15 mm top Z distance works best when printing with variable layer height.

Happy printing! Can't wait to see photos of your prints! If you're scaling, experimenting or encounter any issues, let me know → your input helps the next iteration. Please share your feedback for any rating below ⭐⭐⭐⭐⭐ so we can work on improving, thank you!