Bat T-Shirt Print
Print Profile(1)
Description
DESCRIPTION:
Small quick 3d print to iron onto t-shirts.
Creates a unique 3d print that combins 3d printing and fasion.
Easy way to find your style
INSTRUCTIONS
-Download into bambu studio and print.
-After printing ,carefully remove the 3d print of the build plate. be carefull it is only 0.3mm thick.
-Set up an ironing board and then preheat the iron.
-Put the t-shirt on the ironing board, then place the 3d print in a desighered area, and cover it with heat-resistant paper (e.g. baking/parchment paper)
-Use the iron and press on the model for 15 to 20 seconds.
-Wait a moment, then remove the paper, the 3d print should remain on the t-shirt.
-(Optional) Turn the T-shirt inside out and iron the area where the model is applied for an additional 5–10 seconds.
NOTE:
-T-shirts with 3d prints should be washed at a temperature not exceeding 50°C (122°F).
Washing at higher temperatures may cause the model to peel off from the fabric.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)