Soccer Ball Fridge Magnet 3D

🇪🇸 Solo para uso personal ✔️ | Licencia comercial disponible en mi perfil 🔐
🇬🇧 Personal use only ✔️ | Commercial license available on my profile page 🔐

Bring the passion of the 2026 World Cup to your kitchen! This is a high-quality, beautifully layered fridge magnet inspired by the official tournament ball design.

The best part? You DO NOT need an AMS or multi-material system to print this! The model has been meticulously split into separate parts so you can print everything on a single build plate using the "Print by Object" feature, or simply print the pieces in batches with your favorite colored filaments and snap/glue them together.

It is 100% flat on the back, ensuring a perfect, flush fit against your refrigerator with zero gaps.

🛠️ Key Features & Design Highlights:

• No AMS Needed / Print by Object: All parts are pre-oriented and separated. You can arrange them on the same plate and print them color by color using standard single-extruder printers.
• Fast Print: Under 42 Minutes!
• Easy & Fast Assembly: The pieces fit together like a simple puzzle. Just a few drops of superglue (CA glue) and your World Cup magnet is ready!
• Ready to Print: No rotation or scaling needed. Drop the files into your slicer, assign your colors, and start printing immediately.
• Perfect Flush Fit: The backside is entirely flat with sharp, clean edges, allowing the magnet to sit perfectly flush against any metallic surface.
• Built-in Magnet Slot: Features a pre-designed pocket on the back perfectly sized for a 10x10x2mm magnet.

🖨️ Recommended Print Settings:

• Orientation: All parts are already pre-oriented flat on their backs.
• Print Mode (Optional): In Bambu Studio / OrcaSlicer, change the Print Sequence from "By Layer" to "By Object" if you want to print multiple colors on the same plate in one go.
• Infill: 15% (Gyroid or Grid).
• Wall Loops: 2-3 walls for clean geometric lines.
• Top/Bottom Layers: 4-5 layers to ensure solid, vibrant colors without any infill shadowing.
• Layer Height: 0.20mm for a fast print, or 0.16mm for extra crisp top surface details.

If you love the design, please upload your print photos and leave a ⭐⭐⭐⭐⭐ rating! I'd love to see your color combinations on the fridge!

🚀 Boost my models for free! It helps me create more designs for you
🔐 Want to sell physical prints? Join my commercial membership from my profile