RadioMaster ER8 Case / Mount for RC Airplanes
Print Profile(1)
Description
RadioMaster ER8 Receiver Protective Case / Mount for RC Airplanes
This is a lightweight, durable, and protective case specifically designed for the RadioMaster ER8 ELRS receiver. If you are looking for a clean way to mount your receiver in an RC airplane while protecting the PCB and securing the antennas, this is the perfect solution!
Features:
- Perfect Fit: Tailored precisely for the RadioMaster ER8 dimensions.
- Easy Mounting: Includes integrated mounting tabs/slots to easily secure it to your fuselage.
- Antenna Relief: Designed with specific exit paths for the antennas to prevent bending or damage.
- Ultra-Lightweight: Optimized to add minimal weight to your aircraft.
đ Bill of Materials (BOM):
To assemble and install this mount, you will need:
- 1x 3D Printed Case (this model)
- 1x RadioMaster ER8 Receiver - https://s.click.aliexpress.com/e/_c3WUvnJT
For securing the case to the airplane (Choose one):
- Double-sided servo tape / Velcro OR
- 2x Small zip-ties  OR
- 6x Small  screws (e.g., M3). - https://s.click.aliexpress.com/e/_c2viuRdr
- 2x Small Nuts (e.g., M3). - https://s.click.aliexpress.com/e/_c3K3GVT7
Print Settings (Recommended):
- Material: PETG or ASA/ABS (recommended for UV and heat resistance inside the cockpit), but PLA works fine for cool environments.
- Infill: 15% - 25% (Gyroid or Grid).
- Walls/Perimeters: 3 or 4.
- Supports: Â Needed.
- Layer Height: 0.2mm.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFLâC license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)