Crayon Can Cooler ( Multiple Sizes Available )

Crayon Can Cooler Holder

Bring a burst of childhood nostalgia to your drink setup with this Crayon‑themed can cooler holder. Designed to mimic the classic crayon silhouette and wrap band, this playful can holder turns any standard drink can into a colorful display piece.

This model is available in multiple sizes, making it easy to choose the perfect fit for different cans. 

Sizes currently available 7.5oz Mini, 12oz, 11-12oz Skinny, and 16oz.

I have designed the lid to where it easily twists on and will stop in roughly the same place each time.  This will also securely hold the can from coming out.

Hole for the straw is tapered and will line up with the hole in the top of the can.

Can easily be printed with PLA or PETG with minimal color changes.  Prime tower is not necessary if you set your purging volumes correctly depending on the color you are using.  For lighter colors switching to black, I recommend 800-900 purge volume.

When assembling the handle, I recommend to put a couple dabs of super glue on the ends of the pins that go into the side of the can holder.  But it is not necessary as they will lock in place.

Supports are only needed for the lid.  I highly recommend using a support filament, PLA, PETG or vice versa depending on what filament your are using as the support interface layer.  This will give you the highest quality finish on the bottom of the lid.

Turn on Contour Scarf Seams on your filament settings to help make the seams not as noticable.

Lid may not line up straight with the front at first.  But if you loosen and tighten a few times it will line up straight.

Feel free to add print profiles with logo's, etc..

Thanks for choosing our designs! Show off your work — leave a review and upload a photo of your printed model so others can see what you’ve brought to life.

You can also get a commercial license from our Patreon page here: 

 https://www.patreon.com/OwlAmazingCrafts